T18 HYDRAULIC

Description

• Plant cover drill/ micro granulator with hydraulic ventilation and pipe descent.

Description:

• The distributor is equipped with an hydraulic blower requiring 40 L/min (hydraulic hoses, push-pull and pressure gauge are supplied with the machine).
• The distribution roller is driven by a self-regulated electric motor.
• The airflow transfers the seed into flexible plastic hoses with an inside diameter of 30mm.
• 30 A electrical distribution and 40 L/min hydraulic ventilation.

Options:

• It is possible to equip each distributor with the desired number of outputs from 1 to 12 outlets for each tank.
• Spreader plate can be installed at the end of the pipes to disperse the seeds.
• There are 4 types of splines: White (very small flow), Green (small flow), Yellow (medium flow), and Red (large flow). For a larger flow rate, choose the medium yellow and/or red high-flow spline.
• The splitters.
• The pipe roll of 25 meters.
• The loading bridge.

For the control boxes we offer several choices between the standard and different DPA:

• A standard control box that includes 8 meters of wire: 2 meters from the socket to the control box and 6 meters from the control box to the device. For a different length, please contact us.
• A DPA with sensor to be positioned either on a wheel, on one end of the roller or on the back of a disc.
• A DPA with ISO plug by taking the tractor information on the 7-pin plug.
• And a DPA with a GPS antenna positioned outside the cabin.

Use:

• The Delimbe T18 blower can be mounted on a tine harrow, stubble cultivator, combine harvester, among others.
• Used on weeder harrows, the device helps regenerate grasslands in the spring.
• On stubble cultivator, the seed must be placed before the roller so that the projection of it covers the seedling.

Technical sheet: